Remove-EventLog

Deletes an event log or unregisters an event source.

Syntax

Remove-EventLog [-LogName] <string[]> [[-ComputerName] <string[]>] [-Confirm] [-WhatIf] [<CommonParameters>]

Remove-EventLog [[-ComputerName] <string[]>] [-Source <string[]>] [-Confirm] [-WhatIf] [<CommonParameters>]

Description

The Remove-EventLog cmdlet deletes an event log file from a local or remote computer and unregisters all of its event sources for the log. You can also use this cmdlet to unregister event sources without deleting any event logs.

The cmdlets that contain the EventLog noun (the EventLog cmdlets) work only on classic event logs. To get events from logs that use the Windows Event Log technology in Windows Vista and later versions of Windows, use Get-WinEvent.

Parameters

-ComputerName <string[]>

Specifies a remote computer. The default is the local computer.

Type the NetBIOS name, an Internet Protocol (IP) address, or a fully qualified domain name of a remote computer. To specify the local computer, type the computer name, a dot (.), or "localhost".

This parameter does not rely on Windows PowerShell remoting. You can use the ComputerName parameter of Remove-EventLog even if your computer is not configured to run remote commands.

Required?	false
Position?	2
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-LogName <string[]>

Specifies the event logs. Enter the log name (the value of the Log property; not the LogDisplayName) of one or more event logs , separated by commas. Wildcard characters are not permitted. This parameter is required.

Required?	true
Position?	1
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Source <string[]>

Unregisters the specified event sources. Enter the source names (not the executable name), separated by commas.

Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Confirm

Prompts you for confirmation before executing the command.

Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-WhatIf

Describes what would happen if you executed the command without actually executing the command.

Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters.

Inputs and Outputs

The input type is the type of the objects that you can pipe to the cmdlet. The return type is the type of the objects that the cmdlet returns.

Inputs

None

You cannot pipe input to this cmdlet.

Outputs

None

This cmdlet does not return any output.

Notes

To use Remove-EventLog on Windows Vista and later versions of Windows, start Windows PowerShell with the "Run as administrator" option.

If you remove an event log and then re-create the log, you will not be able to register the same event sources. Applications that used the events sources to write entries to the original log will not be able to write to the new log.

When you unregister an event source for a particular log, the event source might be prevented from writing entries in other event logs.

Example 1

C:\PS>remove-eventlog -logname MyLog

This command deletes the MyLog event log from the local computer and unregisters its event sources.

Example 2

C:\PS>remove-eventlog -logname MyLog, TestLog -computername Server01, Server02, localhost

This command deletes the MyLog and TestLog event logs from the local computer ("localhost") and the Server01 and Server02 remote computers. The command also unregisters the event sources for these logs.

Example 3

C:\PS>remove-eventlog -source MyApp

This command deletes the MyApp event source from the logs on the local computer. When the command completes, the MyApp program cannot write to any event logs.

Example 4

C:\PS>get-eventlog -list

Max(K) Retain OverflowAction        Entries Log
  ------ ------ --------------        ------- ---
  15,168      0 OverwriteAsNeeded      22,923 Application
  15,168      0 OverwriteAsNeeded          53 DFS Replication
     512      7 OverwriteOlder              0 Directory Service
  15,168      7 OverwriteOlder              0 Hardware Events
     512      7 OverwriteOlder              0 Internet Explorer
  20,480      0 OverwriteAsNeeded           0 Key Management Service
  30,016      0 OverwriteAsNeeded      50,060 Security
  15,168      0 OverwriteAsNeeded      27,592 System
  15,360      0 OverwriteAsNeeded      18,355 Windows PowerShell
  15,168      7 OverwriteAsNeeded          12 ZapLog

C:\PS> remove-eventlog -logname ZapLog

C:\PS> get-eventlog -list

  Max(K) Retain OverflowAction        Entries Log
  ------ ------ --------------        ------- ---
  15,168      0 OverwriteAsNeeded      22,923 Application
  15,168      0 OverwriteAsNeeded          53 DFS Replication
     512      7 OverwriteOlder              0 Directory Service
  15,168      7 OverwriteOlder              0 Hardware Events
     512      7 OverwriteOlder              0 Internet Explorer
  20,480      0 OverwriteAsNeeded           0 Key Management Service
  30,016      0 OverwriteAsNeeded      50,060 Security
  15,168      0 OverwriteAsNeeded      27,592 System
  15,360      0 OverwriteAsNeeded      18,355 Windows PowerShell


Description
-----------
These commands show how to list the event logs on a computer and verify that a Remove-EventLog command was successful.

The first command lists the event logs on the local computer.

The second command deletes the ZapLog event log.

The third command lists the event logs again. The ZapLog event log no longer appears in the list.

Example 5

C:\PS>get-wmiobject win32_nteventlogfile -filter "logfilename='TestLog'" | foreach {$_.sources}

MyApp
TestApp

C:\PS> remove-eventlog -source MyApp

C:\PS> get-wmiobject win32_nteventlogfile -filter "logfilename='TestLog'} | foreach {$_.sources}
TestApp


Description
-----------
These commands use the Get-WmiObject cmdlet to list the event sources on the local computer. You can these commands to verify the success of a command or to delete an event source.

The first command gets the event sources of the TestLog event log on the local computer. MyApp is one of the sources.

The second command uses the Source parameter of Remove-EventLog to delete the MyApp event source.

The third command is identical to the first. It shows that the MyApp event source was deleted.