Creates a new variable.
Syntax
New-Variable [-Name] <string> [[-Value] <Object>] [-Description <string>] [-Force] [-Option {<None> | <ReadOnly> | <Constant> | <Private> | <AllScope>}] [-PassThru] [-Scope <string>] [-Visibility {<Public> | <Private>}] [-Confirm] [-WhatIf] [<CommonParameters>]
Description
The New-Variable cmdlet creates a new variable in Windows PowerShell. You can assign a value to the variable while creating it or assign or change the value after it is created.
You can use the parameters of New-Variable to set the properties of the variable (such as those that create read-only or constant variables), set the scope of a variable, and determine whether variables are public or private.
Typically, you create a new variable by typing the variable name and its value, such as "$var = 3", but you can use the New-Variable cmdlet to use its parameters.
Parameters
-Description <string>
Specifies a description of the variable.
|
Required? |
false |
|
Position? |
named |
|
Default Value |
none |
|
Accept Pipeline Input? |
false |
|
Accept Wildcard Characters? |
false |
-Force
Allows you to create a new variable with the same name as an existing read-only variable.
By default, you can overwrite a variable unless the variable has an option value of ReadOnly or Constant. For more information, see the Option parameter.
|
Required? |
false |
|
Position? |
named |
|
Default Value |
none |
|
Accept Pipeline Input? |
false |
|
Accept Wildcard Characters? |
false |
-Name <string>
Specifies a name for the new variable.
|
Required? |
true |
|
Position? |
1 |
|
Default Value |
none |
|
Accept Pipeline Input? |
true (ByPropertyName) |
|
Accept Wildcard Characters? |
false |
-Option <ScopedItemOptions>
Sets the value of the Options property of the new variable.
Valid values are:
-- None: Sets no options. ("None" is the default.)
-- ReadOnly: The value of the variable cannot be changed except by using the Force parameter. You can use Remove-Variable to delete the variable.
-- Constant: The variable cannot be deleted, and its properties cannot be changed. "Constant" is available only when you are creating an alias. You cannot change the option of an existing variable to "Constant".
-- Private: The variable is available only within the scope specified by the Scope parameter. It is inherited by child scopes. (This value is not related to the "Private" value of the Visibility parameter.)
-- AllScope: The variable is copied to any new scopes that are created.
To see the Options property of the variables, type "get-variable| Format-Table -property name, options -autosize".
|
Required? |
false |
|
Position? |
named |
|
Default Value |
none |
|
Accept Pipeline Input? |
false |
|
Accept Wildcard Characters? |
false |
-PassThru
Returns an object representing the new variable. By default, this cmdlet does not generate any output.
|
Required? |
false |
|
Position? |
named |
|
Default Value |
none |
|
Accept Pipeline Input? |
false |
|
Accept Wildcard Characters? |
false |
-Scope <string>
Determines the scope of the new variable. Valid values are "Global", "Local", or "Script", or a number relative to the current scope (0 through the number of scopes, where 0 is the current scope and 1 is its parent). "Local" is the default. For more information, see about_Scopes.
|
Required? |
false |
|
Position? |
named |
|
Default Value |
none |
|
Accept Pipeline Input? |
false |
|
Accept Wildcard Characters? |
false |
-Value <Object>
Specifies the initial value of the variable.
|
Required? |
false |
|
Position? |
2 |
|
Default Value |
none |
|
Accept Pipeline Input? |
true (ByValue, ByPropertyName) |
|
Accept Wildcard Characters? |
false |
-Visibility <SessionStateEntryVisibility>
Determines whether the variable is visible outside of the session in which it was created. This parameter is designed for use in scripts and commands that will be delivered to other users.
Valid values are:
-- Public: The variable is visible. ("Public" is the default.)
-- Private: The variable is not visible.
When a variable is private, it does not appear in lists of variables, such as those returned by Get-Variable, or in displays of the Variable: drive. Commands to read or change the value of a private variable return an error. However, the user can run commands that use a private variable if the commands were written in the session in which the variable was defined.
|
Required? |
false |
|
Position? |
named |
|
Default Value |
Public |
|
Accept Pipeline Input? |
false |
|
Accept Wildcard Characters? |
false |
-Confirm
Prompts you for confirmation before executing the command.
|
Required? |
false |
|
Position? |
named |
|
Default Value |
none |
|
Accept Pipeline Input? |
false |
|
Accept Wildcard Characters? |
false |
-WhatIf
Describes what would happen if you executed the command without actually executing the command.
|
Required? |
false |
|
Position? |
named |
|
Default Value |
none |
|
Accept Pipeline Input? |
false |
|
Accept Wildcard Characters? |
false |
<CommonParameters>
This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters.
Inputs and Outputs
The input type is the type of the objects that you can pipe to the cmdlet. The return type is the type of the objects that the cmdlet returns.
|
Inputs |
System.Object You can pipe a value to New-Variable. |
|
Outputs |
None or System.Management.Automation.PSVariable When you use the PassThru parameter, New-Variable generates a System.Management.Automation.PSVariable object representing the new variable. Otherwise, this cmdlet does not generate any output. |
Example 1
C:\PS>new-variable days This command creates a new variable named "days". It has no value immediately following the command.
Example 2
C:\PS>new-variable zipcode -value 98033 This command creates a variable named "zipcode" and assigns it the value "98033".
Example 3
C:\PS>new-variable -name max -value 256 -option readonly new-variable -name max -value 1024 new-variable -name max -value 1024 -force C:\PS> new-variable -name max -value 256 -option readonly C:\PS> new-variable -name max -value 1024 New-Variable : A variable with name 'max' already exists. At line:1 char:13 + new-variable <<<< -name max -value 1024 C:\PS> new-variable -name max -value 1024 -force Description ----------- This example shows how to use the ReadOnly option of New-Variable to protect a variable from being overwritten. The first command creates a new variable named Max and sets its value to "256". It uses the Option parameter with a value of ReadOnly. The second command tries to create a second variable with the same name. This command returns an error, because the read-only option is set on the variable. The third command uses the Force parameter to override the read-only protection on the variable. In this case, the command to create a new variable with the same name succeeds.
Example 4
C:\PS>new-variable -name counter -visibility private
#Effect of private variable in a module.
C:\PS> get-variable c*
Name Value
---- -----
Culture en-US
ConsoleFileName
ConfirmPreference High
CommandLineParameters {}
C:\PS> $counter
"Cannot access the variable '$counter' because it is a private variable"
C:\PS> Get-Counter
Name Value
---- -----
Counter1 3.1415
...
Description
-----------
This command demonstrates the behavior of a private variable in a module. The module contains the Get-Counter cmdlet, which has a private variable named "Counter". The command uses the Visibility parameter with a value of "Private" to create the variable.
The sample output shows the behavior of a private variable. The user who has loaded the module cannot view or change the value of the Counter variable, but the Counter variable can be read and changed by the commands in the module.
See Also